Greenworks 2300 PSI 2.3 GPM Electric Pressure Washer with TruBrushless Motor - 25ft Hose, Quick Connect Wand & 4 Nozzles (15°, 24°, 40°, Turbo) - Perfect for Home Cleaning, Driveway Washing, Deck Maintenance & Outdoor Surfaces

After assembly and 2 hours of use this appears to be a quality tool. Assembly was easy. One caveat I was short one washer. Easily replaced from my supplies on hand. I plugged it into a receptacle protected by a GFCI circuit breaker. The circuit breaker tripped immediately when the pump started. I was aware of the potential issue with duplicate GFCI applications. I switched to a GFCI receptacle. The pump worked fine from there. It did take a moment to get accustomed to the soft start of the pump motor. Not a negative just new experience. I used the 40 deg. nozzle to clean our deck surface and test on part of our vinyl siding. Both cleaned easily. With my previous sprayer I had to use the 15 deg. nozzle to get the same results. I also have a 15" Greenworks surface washer attachment. It worked great as well.Further I would say this is a well designed tool. Hose storage is sturdy. Cord storage is sufficient. Wand storage is adequate. All are logically placed. Rivnuts are used to mount the hose holders and the wand holder. much better than sheetmetal screws into the metal handle. nozzle/cord holder assembly uses four plastic posts heavy enough and long enough for the sheetmetal screws to hold it securely. I have about another 20 hours of pressure washing to do this spring. I will report a follow up after I'm done.3/27/25 (Update) Soap dispenser worked well with the soap nozzle. When I switched to the 40 deg. nozzle the soap quit flowing. The turbo nozzle worked for about 20 minutes. the element in the head quit rotating. Initially it would pause briefly. Eventually it quit completely. I switch to the turbo nozzle from my previous pressure washer. It worked fine for the next hour.